+91 22 2805 3403

This email address is being protected from spambots. You need JavaScript enabled to view it.

You are here: HomeEarth Rod & Fittings

Earth Rod & Fittings

Copper Bonded Grounding Rod / earth rod 
VS” copper bonded earth rod are made from low carbon Steel. Earth Rods are molecularly bonded with 99.9% pure electrolytic copper. 

Salient Features-

  • Perfectly Bonded rod will last longer, drive easier and will not crack.
  • Corrosion resistance while providing the lowest resistance to ground.
  • Threads are rolled by roll threading process, which ensures that an even copper covering is maintained, even at the roof of the thread. Roll thread gives greater strength than cut thread.
  • Thread rolling process raises the surface of the rod, so that thread dia (T) is greater than shank dia. (S). As seen in figure: -
Dimension Rod Size 
(DIA x LENGTH)
Actual Rod Dia “S” Thread Dia “T” Product Code Copper Bonded Product Code Solid Bonded
9.5 x 1200 
(UN - THREADED)
9.5 - V01-CB-012 V02-SB-012
9.5 x 1800 
(UN - THREADED)
9.5 - V01-CB-018 V02-SB-018
14 x 1200 12 14 V01-CB-1412 V02-SB-1412
14 x 1500 12 14 V01-CB-1415 V02-SB-1415
14 x 1800 12 14 V01-CB-1418 V02-SB-1418
14 x 2000 12 14 V01-CB-1420 V02-SB-1420
14 x 2400 12 14 V01-CB-1424 V02-SB-1424
5/8” x 4’ or 16mm x 1200 14.2 5/8” V01-CB-112 V02-SB-112
5/8” x 5’ or 16mm x 1500 14.2 5/8” V01-CB-115 V02-SB-115
5/8’ x 6’ or 16mm x 1800 14.2 5/8” V01-CB-118 V02-SB-118
5/8” x 8’ or 16mm x 2400 14.2 5/8” V01-CB-124 V02-SB-124
5/8” x 10' or 16mm x 3000 14.2 5/8” V01-CB-130 V02-SB-130
5/8” x 4’ or 16mm x 1200 16 5/8” V01-CB-312 V02-SB-312
5/8” x 5’ or 16mm x 1500 16 5/8” V01-CB-315 V02-SB-315
5/8” x 6’ or 16mm x 1800 16 5/8” V01-CB-318 V02-SB-318
3/4” x 4’ or 19mm x 1200 17.2 3/4” V01-CB-212 V02-SB-212
3/4” x 5' or 19mm x 1500 17.2 3/4” V01-CB-215 V02-SB-215
3/4” x 6’ or 19mm x 1800 17.2 3/4” V01-CB-218 V02-SB-218
3/4” x 8’ or 19mm x 2400 17.2 3/4” V01-CB-224 V02-SB-224
3/4” x 10’ or 19mm x 3000 17.2 3/4” V01-CB-230 V02-SB-230
25mm x 2400 
(UN - THREADED)
25 - V01-CB-424 V02-SB-424
25mm x 3000 
(UN - THREADED)
25 - V01-CB-430 V02-SB-430





* Above Rod can also be made as per customer specification.
 
 
 

DRIVING STUD
Material - High Tensile Steel
These are used to drive the Earth Rod to the Ground. Re-usable many times suitable for Power Hammering.

Size Product Code
14mm V03-DS-14
5/8” or 16mm V03-DS-16
3.4” or 19mm V03-DS-19
1/2” V03-DS-12
 

COUPLER
Material- Copper Alloy 
Coupler are made from copper alloy & counter bored to completely enclose threads, protecting them from damage & corrosion.
Size Product Code Brass Product Code AL. Bronze
14mm V04-C-14 V05-C-14
5/8” or 16mm V04-C-16 V05-C-16
3/4” or 19mm V04-C-19 V05-C-19
 

SOLID COPPER ROD
"VS” solid copper earth rod are made from 99.9% pure electrolytic copper. Solid Copper rods offer greater resistance to corrosion.
They are ideally used in applications where soil conditions are very aggressive. for eg. soil with high salt content.

Rod DIA. mm Length Thread DIA Product Code
12 1200 M8 V06-SCR-1212
12.5 1200 M8 V06-SCR-12512
14 1200 M10 V06-SCR-1412
14 1500 M10 V06-SCR-1415
15 1200 M10 V06-SCR-1512
15 1500 M10 V06-SCR-1515
16 1200 M10 V06-SCR-1612
16 1500 M10 V06-SCR-1615
20 1200 M12 V06-SCR-2012
20 1500 M12 V06-SCR-2015
INTERNALLY THREADED 


 

ACCESSORIES FITTINGS FOR SOLD COPPER ROD

Size Driving Head Coupling Dowell Driving Tip
M 8 V07-DH-8 V08-CD-8 V09-DT-8
M 10 V07-DH-10 V08-CD-10 V09-DT-10
M 12 V07-DH-12 V08-CD-12 V09-DT-12
Driving
Head
Coupling
Dowell
Driving Tip

MECHANICALLY COPPER CLADED GROUNDING ROD
Mechanically copper claded grounding rod is made when electrolytic grade 99.9% copper tube with wall thickness of 0.25 (250 microns) is claded to a low carbon steel rod. Even if the rod is bent by 450, the copper tube should not peel out of the Steel rod.

Rod Size “S” Length Product Code
12 1200 (4 ft) V10-CCR-1412
12 1800 (6 ft) V10-CCR-1418
12 2400 (8 ft) V10-CCR-1424
14 1200 (4 ft) V10-CCR-112
14 1800 (6 ft) V10-CCR-118
14 2400 (8 ft) V10-CCR-124
16 1200 (4 ft) V10-CCR-312
16 1800 (6 ft) V10-CCR-318
16 2400 (8 ft) V10-CCR-324
16 3000 (10 ft) V10-CCR-330
19 1200 (4 ft) V10-CCR-412
19 1800 (6 ft) V10-CCR-418
19 2400 (8 ft) V10-CCR-424
19 3000 (10 ft) V10-CCR-430




 

GALVANISED STEEL EARTH ROD

Galvanised Steel Earth Rods are made up of high Strength low carbon steel and hot dip galvanized. This design of the rod is actually cost effective option for earthing.

Rod Size “S” Length Product Code
1/2” / 12.5 mm 1500 (5 ft) V11-GSR-1215
1/2” / 12.5 mm 1800 (6 ft) V11-GSR-1218
1/2” / 12.5 mm 2400 (8 ft) V11-GSR-1224
5/8” / 14.2 mm 1800 (6 ft) V11-GSR-1418
5/8” / 14.2 mm 2400 (8 ft) V11-GSR-1424
5/8” / 14.2 mm 3000 (10 ft) V11-GSR-1430
3/4” / 17.2 mm 2400 (8 ft) V11-GSR-1724
3/4” / 17.2 mm 3000 (10 ft) V11-GSR-1730
1” / 23.1 mm 3000 (10 ft) V11-GSR-2330
Above rod can also be supplied as per customer specification.
 

Stainless STEEL UNTHREADED ROD
VS” stainless steel ground rods are used to overcome many of the problems caused by galvanic corrosion which can take place between dissimilar metals burried in close proximity. Other advantages of stainless steel rod are that they are highly resistant to corrosion and much more anodic than copper.


5/8” 14.2 5’ 1.5 10 V12-SSR-145
5/8” 14.2 8’ 2.44 10 V12-SSR-148
5/8” 14.2 10’ 3.05 10 V12-SSR-1410
3/4” 17.2 5’ 1.5 5 V12-SSR-175
3/4” 17.2 10’ 3.05 5 V12-SSR-1710
1.0” 23.1 10’ 3.05 1 V12-SSR-2410

*Stainless Steel Rod can also be supplied in Internally Threaded.


CROSS EARTH ROD - WITH FLAG / without flag
Cross Earth Rod, Hot Galvanised Steel with 3 holes of 11 mm or 13 mm.

With Flag Without Flag
50 x 50 x 3 1000 V13-CRF-10 V14-CR-10
50 x 50 x 3 1500 V13-CRF-15 V14-CR-15
50 x 50 x 3 2000 V13-CRF-20 V14-CR-20
50 x 50 x 3 2500 V13-CRF-25 V14-CR-25
50 x 50 x 3 3000 V13-CRF-30 V14-CR-30

“T” EARTH ROD
“T” Earth Rod with 2 holes of 13 MM.

50 x 50 x 7 1550 V15-TER-155
Sets of Hot Galvanised Bolts
(2Bolts M12 x 53mm, 2 Washers & 2 Nuts)
 
Go to top